This article introduces what you need to pay attention to when installing Y filter.

1.The Y-type filter can be installed horizontally or vertically according to the needs of the pipeline during installation, but no matter how to install it, pay attention to ensure that the direction of the system water flow is consistent with the direction indicated by the arrow on the valve body.

2.When the Y-type filter is repaired and cleaned, it is necessary to temporarily stop the delivery of liquid. Therefore, when installing the Y-type filter, attention should be paid to installing stop valves upstream and downstream, so that when maintenance is required, just close the valve through the stop valve. Downstream liquid delivery is sufficient.

3. In order to facilitate the observation of the amount of impurities retained on the filter screen, the corresponding pressure gauge should be installed at the upstream and downstream of the Y-type filter at the same time, so that when the reading of the upstream and downstream pressure gauges is large, it means that there are a lot of impurities, and the filter needs to be cleaned. filter on.

4. If the Y-type filter is installed in the air-conditioning system, then because the cooling tower in the air-conditioning system will have some suspended solids and particulate impurities, so pay attention to installing the Y-type filter on the return pipe, so as to be effective The protection of the air conditioning unit is not blocked.

5. When installing the Y-type filter, pay attention to reserve a certain maintenance space so that it can be properly maintained and maintained during use.